Rainham In Kent Roof Repairs
Local And Trusted Professionals
- Insurance Backed Guarantee
- £2 Million Liabaility Insurance
- FREE Scaffolding With Any New Roof
Get A FREE Roof
Inspection Quote

15+ Years Experience

FREE Roof Inspection

FREE Quotes

Card Payments Welcome
Roof Repairs Rainham Kent
Chimney Lead Flashing Repair Project Completed in Rainham, Kent
Hi, I’m Michael, owner of Michaels Roofing & Building.
This page is based on a recent roof repairs Rainham Kent project where we were contacted by a homeowner after they noticed damp staining appearing around their chimney breast following several weeks of heavy rain.
They had initially assumed the chimney itself was leaking, but after carrying out a full roof inspection, we discovered the real problem was failed lead flashing at the base of the chimney stack.
Over the years, the original lead had started to lift away from the brickwork and parts of the mortar holding the flashing in place had cracked. This allowed rainwater to work its way behind the flashing before running down into the loft space.
Fortunately, the customer contacted us before the water had caused serious structural damage to the surrounding timbers.
Step 1 – Meeting the Homeowner & Investigating the Leak
Whenever we arrive at a roof repair, I always like to speak with the homeowner before climbing onto the roof.
The customer explained they had noticed a damp patch slowly appearing on the chimney breast inside the spare bedroom. It wasn’t dripping, but every time it rained heavily the stain became slightly darker.
Before getting the ladders out, we carried out a full inspection around the outside of the property.
We looked for:
- Damaged lead flashing
- Cracked chimney mortar
- Missing roof tiles
- Blocked gutters
- Signs of water staining beneath the chimney
From ground level, everything looked fairly normal, but I could already see that part of the lead flashing wasn’t sitting tightly against the brickwork.
That was enough to warrant a much closer inspection.
Step 2 – Safe Roof Access & Close Inspection
After setting up our access equipment safely, we climbed onto the roof to inspect the chimney properly.
Once we were at roof level, the problem became much clearer.
We found:
- Lead flashing lifting away from the chimney
- Cracked mortar inside the lead chase
- Small gaps allowing rainwater behind the flashing
- Moss growing where moisture had been trapped
- Signs of previous repairs using roof sealant
Unfortunately, someone had attempted to repair the flashing several years earlier using roofing mastic rather than repairing it correctly.
The sealant that was used had dried out and cracked, allowing water to penetrate once again.
Step 3 – Removing the Failed Flashing
Rather than sealing over the problem again, we removed the affected flashing completely.
This is always the best approach because temporary repairs rarely last.
After removing the old flashing we found:
- Loose mortar inside the chase
- Damp brickwork behind the flashing
- Small areas of deteriorating pointing
- Early signs of water staining beneath the roof tiles
Everything was cleaned thoroughly before any new materials were installed.
By removing all the failed materials first, we could be confident the new flashing would create a long-lasting watertight seal.
Step 4 – Installing New Lead Flashing
With the chimney prepared properly, we installed brand new Code 4 lead flashing.
The repair included:
- Cutting fresh lead to size
- Installing stepped flashing correctly
- Dressing the lead neatly over the roof tiles
- Repointing the lead chase
- Securing every section firmly into the brickwork
- Checking overlaps to ensure complete weather protection
Good lead work isn’t just about stopping leaks, it’s also about allowing the lead to naturally expand and contract with changing temperatures without splitting.
Taking the time to install it correctly now helps prevent future problems.
Step 5 – Inspecting the Rest of the Roof
While we were already working on the chimney, I carried out a full inspection of the surrounding roof.
During this inspection we also found:
- Two cracked roof tiles nearby
- Minor moss growth
- Gutters beginning to collect debris
- Ridge tiles still in good condition
We replaced the damaged tiles before leaving, preventing another potential leak from developing.
It’s always worth checking the surrounding roof while access equipment is already in place.
Step 6 – Final Checks and Customer Walkthrough
Once the flashing had been completed, we carried out our final inspection.
We checked:
- Flashing joints
- Mortar finish
- Lead positioning
- Water run-off
- Tile overlaps
- Chimney pointing
Finally, we photographed the completed repair and showed everything to the homeowner so they could see exactly what had been done.
The customer was relieved that the leak had been identified before it caused major internal damage.
Why This Roof Repair in Rainham Kent Was Important
This job shows why chimney leaks should never be ignored.
The longer water gets behind failed flashing, the more damage it can cause to:
- Roof timbers
- Roof felt
- Loft insulation
- Internal plaster
- Chimney breast decoration
- Ceiling joists
By repairing the flashing early, we prevented what could eventually have required significant structural repairs.
Common Ridge Tile Problems We See in Rainham Kent
Many properties across Rainham have older chimney stacks that naturally deteriorate over time.
The most common problems we repair include:
- Failed lead flashing
- Cracked chimney pointing
- Loose chimney pots
- Water entering around the stack
- Moss growth
- Perished mortar
- Lead flashing lifting
- Storm damage
Most chimney leaks can be repaired quickly if they’re caught early.
Roof Repairs Rainham Kent– Honest Advice From Local Roofers
At Michaels Roofing & Building, we believe in repairing roofs properly rather than applying temporary fixes.
If your lead flashing simply needs replacing, we’ll tell you.
If your chimney requires more extensive repairs, we’ll explain exactly why and show you photographs before any work begins.
For this roof repairs Rainham kent project, the customer only required:
- New lead flashing
Fresh pointing
Two replacement roof tiles
Full chimney inspection
No unnecessary work.
No hidden costs.
Just a long-lasting repair carried out properly.
Signs Your Roof May Need Repair
If you notice any of these warning signs, it’s worth arranging an inspection:
- Damp patches around chimney breasts
- Water stains in the loft
- Loose lead flashing
- Cracked pointing
- Missing roof tiles
- Moss around the chimney
- Damp smells upstairs
- Leaks during heavy rain
Small repairs completed early can often prevent much larger roofing bills.
Roof Repair Services in Rainham Kent
We provide professional roof repairs throughout Rainham Kent, including:
- Roof leak repairs
- Lead flashing replacement
- Chimney repairs
- Tile replacement
- Ridge tile repairs
- Storm damage repairs
- Emergency roof repairs
- Roof inspections
- Roof maintenance
Every repair is completed using high-quality materials and proven roofing techniques to keep your home protected for years to come.
Need Roof Repairs in Rainham Kent?
If you’re looking for reliable roof repairs Rainham In Kent, we’d be happy to help.
Whether you’ve discovered a roof leak, damaged flashing or simply want your roof inspected after bad weather, we’ll provide honest advice and a free, no-obligation quotation.
Contact us today for honest roofing advice
Covering Rainham, Sittingbourne and surrounding Kent areas
FAQ – Roof Repairs Rainham Kent
Can lead flashing be repaired?
In some cases, yes. However, if the lead has split, lifted or been repaired multiple times before, replacement is usually the most reliable long-term solution.
Why does my chimney leak when it rains?
The most common causes are failed lead flashing, cracked pointing or damaged roof tiles around the chimney.
How long does lead flashing last?
Quality lead flashing can last 50 years or more when installed correctly.
Is a chimney leak an emergency?
It can become one if water is entering your loft or home. Early inspection is always recommended.
Do you inspect the whole roof?
Yes. Whenever we’re carrying out roof repairs, we inspect the surrounding roof area and let you know if we spot any developing issues.
What Our Clients Say About Us
We've got all your Roofing And Building services covered
Lets us no what service we can help you with
- All Types Of Roofs
- New Roofs
- Roof Repairs
- Fascia, Soffits & Guttering
- Chimney Repairs
- Repointing
- Rendering
- Leadwork
- All Types Of Building Work
- Repairs To Refurbishments
- Driveways & Patios
- Insulation
We've got all your Roofing And Building services covered
Lets us no what service we can help you with
- All Types Of Roofs
- New Roofs
- Roof Repairs
- Fascia, Soffits & Guttering
- Chimney Repairs
- Repointing
- Rendering
- Leadwork
- All Types Of Building Work
- Repairs To Refurbishments
- Driveways & Patios
- Insulation
Our skilled roofers and builders bring years of expertise to every job, ensuring precision and long-lasting results.
Get A FREE Roof
Inspection Quote
Speak To Us
- 77 London Road, Sittingbourne, Kent, ME10 1NL
- 01795 857541
- info@michaelsroofingandbuilding.co.uk
Ready To get A Quote ?
We've got all your Roofing And Building services covered
Lets us no what service we can help you with